Ways To Install The Handrail Brackets

Home » Hardware » Ways to Install the Handrail Brackets

Handrail brackets – Railing bracket ensure a handrail on the wall beside the staircase. First, mark a place on the wall 36 inches from the front edge of the bottom riser. And 6 inches from the end of the balustrade area by means of a pencil. Then repeat for the top riser. Search wall studs with a hammer and finishing nails or stud search. Set handrail brackets in place on the labels and the top of the bracket is flush with the 36-inch mark.

Posted on December 13, 2017 Hardware

Furthermore, pre-drill holes with a 1/8-inch drill bit on the location of each of the screw holes marked on the wall. Install screws through each hole in each handrail brackets. After that, place the rail into place on top of the brackets. Mark the location of the screw holes in each fitting by means of a pencil, to secure the handrail.

12 Photos Gallery of: Ways to Install the Handrail Brackets

Unique Handrail BracketsSize: 1024 x 768

Modern Handrail BracketsSize: 1024 x 768

Handrail BracketsSize: 1024 x 768

Handrail Brackets ModernSize: 1024 x 768

Handrail Brackets IdeasSize: 1024 x 768

Handrail Brackets ChromeSize: 1024 x 683

RELATED TOPIC :  Ideal Corner Commercial Sink Faucet Kitchen

Afterwards, remove handrail and boron map the pilot holes, just enough to start the screws, in each place of the screw of each handrail brackets. Put the banister to the top and bottom brackets by installing screws through the bracket and into the starter holes in the handrail. Studs should be placed 16 inches apart in the middle.  Thel last, adjust additional bracket with the bottom of the railing and secure in place with screws.